Caution
As of April 7th 2026, Discord has expressed their intent to crack down on automating quest completion.
Some users have received the following system message:
There isn't much I can do to make the script undetected, so use it at your own risk, as you most likely WILL get flagged by doing so.
| // | |
| // airtag-decryptor.swift | |
| // | |
| // | |
| // Created by Matus on 28/01/2024. | |
| // | |
| import Foundation | |
| import CryptoKit | |
| // Function to decrypt using AES-GCM |
mitmproxy or mitmweb.
If you plan on sniffing traffic from a macOS VM, it is probably preferable to install mitmproxy on the host OS.System Settings → Network → Advanced → HTTP and HTTPS proxiesOptions → Don't verify server certificates
| # MOVED to public repo: https://github.com/catchdave/ssl-certs/blob/main/replace_synology_ssl_certs.sh |
Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).
The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int