I accidentally broke the bootloader on my Creality 4.2.2 board while flashing Klipper. These instructions show how I recovered and how I flashed Klipper and Katapult as bootloader. You can always follow these steps also if you have a working bootloader and could flash via SD card as with Katapult you can update Klipper without the SD card.
| ## LDO recommended macros to get you started | |
| # These macros are recommended by LDO | |
| # You can copy these entries into your printer.cfg. | |
| # | |
| # Alternatively, | |
| # You can copy these entries into your printer.cfg. | |
| # | |
| [gcode_macro M300] |
| ## LDO recommended macros to get you started | |
| # These macros are recommended by LDO | |
| # You can copy these entries into your printer.cfg. | |
| # | |
| # Alternatively, | |
| # You can copy these entries into your printer.cfg. | |
| # | |
| [gcode_macro M300] |
This is a super ugly Kotlin script to clear the entire trash of Adobe Creative Cloud. There is no "delete all option", so you are stuck with selecting files by shift-clicking and then watching your browser die. I used this script to delete 80.000 files in a few hours. I added some waits to not get flagged by some system, but not sure if needed.
As a dide note, not sure why but the number of "total" files did not constantly decrease although new files were returned every iteraration. It only seems to be an "visual" issue, files get constantly deleted.
While this script isn't copy + paste + run, you can adopt it to your needs and also easily translate it in other languages :) I actually did run this as a Android integration test.
You'll get the Bearer token by visiting creativecloud.adobe.com and then looking through the browser's
| version: '3' | |
| services: | |
| octoprint: | |
| image: octoprint/octoprint | |
| ports: | |
| - "5000:5000" | |
| restart: unless-stopped | |
| volumes: |
I use multiple devices to control my 3D printer and it's alwys a hassle to move changes on profiles etc. between those machines leading to situations where I use an old version of my profiles to print a part because I just forgot to update it.
Here is how you can sync Cura settings between multiple devices:
cura to any convinient location inside your Google Drive / OneDrive / Dropbox folder. You can also rename the folder form cura to somthing else, I called mine Cura Settings.%userprofile%\AppData\Roaming\cura
| # Install gcloud: https://cloud.google.com/sdk/docs/quickstarts | |
| gcloud auth activate-service-account $GOOGLE_APPLICATION_CREDENTIALS | |
| # Make sure to update the file path as well as project-id, location-id and product-set-id | |
| curl -X POST \ | |
| -H "Authorization: Bearer $(gcloud auth application-default print-access-token)" \ | |
| -H "Content-Type: application/json" \ | |
| https://vision.googleapis.com/v1/images:annotate -d "{ | |
| 'requests': [ | |
| { |
| getSimilarProductsFile('your-project-id', 'your-location', 'your-product-set-id', 'your-product-category', 'your-test-image-path') | |
| async function getSimilarProductsFile( | |
| projectId, | |
| location, | |
| productSetId, | |
| productCategory, | |
| filePath, | |
| filter | |
| ) { |
| list('your-project-id', 'your-location') | |
| async function list(projectId, location) { | |
| // Imports the Google Cloud client library | |
| const vision = require('@google-cloud/vision'); | |
| // Creates a client | |
| const client = new vision.ProductSearchClient(); | |
| /** |
| importProductSets('your-project-id', 'your-location', 'gs://link/to/csv') | |
| async function importProductSets(projectId, location, gcsUri) { | |
| // Imports the Google Cloud client library | |
| const vision = require('@google-cloud/vision'); | |
| // Creates a client | |
| const client = new vision.ProductSearchClient(); | |
| /** | |
| * TODO(developer): Uncomment the following line before running the sample. |