arcanemachine

arcanemachine

Some 4xMi50 32GB Benchmarks (Mostly Qwen Coder 30B A3B Q4_0)

Just leaving these here for future reference...

NOTE: Devices 0 and 2 are on PCIe 3x16, Devices 1 and 3 are on PCIe x1

---

user@aipc:~/code/ai/repo/scripts$ ./llama-bench.sh -m ../../models/qwen3-0.6b-Q4_0.gguf 
ggml_cuda_init: found 4 ROCm devices:

arcanemachine

AMD Instinct MI50

This document attempts to consolidate all available information regarding the VBIOS ROMs for the venerable AMD Instinct MI50 - especially the 32 GB variant

Sources include

• reddit
  • https://www.reddit.com/r/LocalLLaMA/comments/1lsgtvy/successfully_built_my_first_pc_for_ai_sourcing/n1kkx7f/
  • https://www.reddit.com/r/ROCm/comments/1kwirmw/instinct_mi50_on_consumer_hardware/

arcanemachine

==> down.csv <==
time,msg,codes,model,button,id,channel,battery_ok,temperature_C,mic,subtype,humidity,state,rain_mm,status,rain_rate,rain_rate_mm_h,rain_rate_in_h,rain_total,rain_in,gust,average,direction,wind_max_m_s,wind_avg_m_s,wind_dir_deg,pressure_hPa,uv,power_W,energy_kWh,radio_clock,sequence,unit,group_call,command,dim,dim_value,dipswitch,rbutton,temperature_F,data,closed,event,tamper,esn,exception,status_hex,xactivity,xtamper1,xtamper2,setpoint_C,switch,cmd,cmd_id,tristate,wind_avg_km_h,wind_max_km_h,signal,sensor_code,uv_sensor_id,uv_status,uv_index,lux,wm,seq,current,interval,learn,message_type,sequence_num,leak_detected,wind_avg_mi_h,storm_dist,strike_count,strike_distance,active,raw_msg,rfi,wind_max_mi_h,wind_approach,flags,maybetemp,binding_countdown,depth_cm,power0_W,power1_W,power2_W,power0,node,ct1,ct2,ct3,ct4,batt_Vrms,temp1_C,temp2_C,temp3_C,temp4_C,temp5_C,temp6_C,pulse,button1,button2,button3,button4,group,transmit,moisture,type,pressure_PSI,battery_mV,pressure_kPa,pulses,pulsecount,len,to

arcanemachine

# Put this code inside a function to easily count the number of times the
# function is called.

# Create the agent
agent_process_name = :your_agent

if Process.whereis(agent_process_name) == nil do
  {:ok, agent_pid} = Agent.start_link(fn -> 0 end)
  Process.register(agent_pid, agent_process_name)
end

arcanemachine

#!/bin/bash

# i3gw - "ghost window" wrapper for i3
# ctrl+c, ctrl+v by budRich 2017
# 
# https://www.reddit.com/r/i3wm/comments/6x5vgp/oc_i3gw/
# https://gist.github.com/budRich/d09cbfd07ffdc57680fbc51ffff3687b
# 
# i3-msg has an undocumented function (open) that creates
# empty containers, or as I call them: ghosts.

arcanemachine

@default_interval 99
@default_timeout 9_000
@doc """
Assert that a condition eventually evaluates to `true`.

## Options

All time-related options are in milliseconds.

- `:timeout` (default: `#{@default_timeout}`) - the maximum total time until the assertion fails

arcanemachine

Here's how I set up gitlab-runner for a non-root user inside a Vagrant VM (should work for non-VM machines as well):

• Check to see if the process is running for the existing user:

ps aux | grep gitlab

• If the process is running, it will look something like this after you run the previous command:

/usr/bin/gitlab-runner run --config /etc/gitlab/runner/config.toml --service gitlab-runner

arcanemachine

CAX11
  - 2-core ARM + 4GB RAM + 40GB Storage + 20TB Traffic
  - 1099 Single / 1995 Multi
    - https://browser.geekbench.com/v6/cpu/1103496

CAX41
  - 16-core ARM + 32 GB RAM + 320GB Storage + 20TB Traffic
  - 1141 Single / 9274 Multi
    - https://browser.geekbench.com/v6/cpu/1153915